Sale!

Club Car Series 48v DC Customized for High Speed GE 5BC59JBS6360-LR3.2

Original price was: $475.00.Current price is: $425.00.

48v Club Car Series 5BC59JBS6360-LR3.2 (5BC59JBS6194D-LR3.2 ) Custom designed for flat ground speed of 21-23 mph.  Recommended for non-lifted carts, 18-20″ OD tires, OEM series solid state control or up to 400A series solid state control. (The OEM rubber spline bumper should be eliminated during installation of this motor to avoid damage to the armature & bearing.)  Either part number 5BC59JBS6194D-LR3.2 or 5BC59JBS6360-LR3.2 could be provided by EMP based on models in stock.

This model can replace GE 5BC59JBS6194D, 5BC59JBS6194B, 5BC59JBS6360, 5BC58JBS6334

THE NATURE OF A SERIES DC MOTOR/SERIES CART SYSTEM:  Series cart systems are very sensitive to changes in load.  The most noticeable time you would see this is on hilly terrain.  A series cart will slow down as you start to climb a hill and will slow down even more the steeper the grade.  When you begin to go downhill, the speed will increase, even to the point of being dangerous if the terrain is steep.  The driver should use the brakes to avoid motor overspeed as the motor will not limit the speed.  Unfortunately, these reactions are the nature of a series DC motor. While we might be able to make this slightly more or less sensitive, this nature will be present no matter what custom design we provide.  Be cautious when working with a series cart.  Never operate a series motor, especially at full voltage, with little to no load (wheels up).  If you want to make sure a series motor works after servicing the vehicle, depress the throttle only about 10% to avoid damage that would not be considered a warranty claim.

1 in stock

SKU: LR3.2-GE-5BC59JBS6360 Categories: ,

Description

GE Club Car 48V Series

  • Remanufactured and Custom High Speed Design GE 48v Series
  • EMP Part Number: 5BC59JBS6360-LR3.2 or 5BC59JBS6194D-LR3.2 (either part number could be provided by EMP based on what is in stock)
  • Motor spline is pre-lubricated with high performance grease to reduce shaft wear. (The OEM rubber spline bumper should be eliminated during installation of this motor to avoid damage to the armature & bearing.)
  • *Designed for non-lifted, OEM 48v Series Club Car (18-20″ OD tires), flat ground use (2 or 4 passenger)
  • *Designed for use with OEM solid state series controls but may require a 400A control if passenger load is excessive.
  • Quality Tested & Remanufactured in USA by Electrical Motor Products, Inc. (Lightning Redesign)
  • Replaces models: 5BC59JBS6194D, 5BC59JBS6194B, 5BC59JBS6360, 5BC58JBS6334
  • SPECIAL PRICING WHILE SUPPLIES LAST
Contact
  • With any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
  • No core return available

Additional information

Weight 36 lbs
Dimensions 14 × 12 × 12 in

Reviews

There are no reviews yet.

Be the first to review “Club Car Series 48v DC Customized for High Speed GE 5BC59JBS6360-LR3.2”

Your email address will not be published. Required fields are marked *