Club Car 36v Series DC, GE 5BC58JBS6163B, 5BC58JBS6362, 101772801, 102237401 Remanufactured

36v Club Car Series GE model number 5BC58JBS6163B, Club Car part number 101772801.  Rebuilt to factory specifications .  The OEM rubber spline bumper should be eliminated during installation of this motor to avoid damage to the armature & bearing.

• EMP, Inc may opt to provide GE model 5BC58JBS6362 which is a direct replacement for GE 5Bc58JBS6163B.  (Please note that model 5BC58JBS6163A is also nameplated as Club Car 101772801, but is slightly mechanically different with a plastic guide ring in the end of the shaft.  The model being sold in this listing can also be used to replace the 5BC58JBS6163A.)

THE NATURE OF A SERIES DC MOTOR/SERIES CART SYSTEM:  Series cart systems are very sensitive to changes in load.  The most noticeable time you would see this is on hilly terrain.  A series cart will slow down as you start to climb a hill and will slow down even more the steeper the grade.  When you begin to go downhill, the speed will increase, even to the point of being dangerous if the terrain is steep.  The driver should use the brakes to avoid motor overspeed as the motor will not limit the speed.  Unfortunately, these reactions are the nature of a series DC motor. While we might be able to make this slightly more or less sensitive, this nature will be present no matter what custom design we provide.  Be cautious when working with a series cart.  Never operate a series motor, especially at full voltage, with little to no load (wheels up).  If you want to make sure a series motor works after servicing the vehicle, depress the throttle only about 10% to avoid damage that would not be considered a warranty claim.