$475.00Original price was: $475.00.$350.00Current price is: $350.00.
48v Club Car Precedent DS, 48v shunt DC 5BC59JBS6390-LR3.9 - “Moderate Speed Design” 23-25 mph, flat ground speed design for non-lifted carts using the OEM factory Curtis controls, 18" or 19" tires. Increased flat ground speed for applications where no extreme loading will occur. Replaces GE shunt motor model number: 5BC59JBS6390, 5BC59JBS6365. Nice flat ground speed increase for 2 or…
36v EZGO Series Motor, AMD Part Number A02-4012, EZGO part number 73445G01 (not for carts with a tow/run switch), Can replace 36v EZGO Series - AMD A95-4005A, EZGO part number 73124G02 (not for carts with a tow/run switch). This motor is fully remanufactured to OEM factory specification and tested to quality standards. This motor is a suitable replacement for 19…
A02-4012-LR3.5 Custom Designed for High Speed, flat ground applications. Replaces AMD A02-4012, A95-4005A or BD4-4001 for 36v EZGO series. Fully remanufactured 36v motor custom designed for 21-24 MPH. 36v EZGO Series using 18-20" OD tires & OEM EZGO 12:1 gear ratio. Designed for OEM factory solid state series controls (no resistors or old-style mechanical controls). Using a solid-state control of…
36v EZGO DCS, SHUNT WOUND, DC motor, AMD Part Number AY4-4001, EZGO Part Number 73124G01. EZGO DCS cart should have a tow/run switch under the seat along with an F/R lever. This motor is fully remanufactured to OEM factory specification and tested to quality standards. Cannot be used in 36v PDS as no sensor is present. Also do not mistake this…
36v EZGO Series Motor, AMD Part Number BD4-4001, EZGO part number 73124G03 (not for carts with a tow/run switch). This motor is fully remanufactured to OEM factory specification and tested to quality standards. Call EMP, Inc for other options if the cart has a tow/run switch. 877-455-1599 THE NATURE OF A SERIES DC MOTOR/SERIES CART SYSTEM: Series cart systems are…
$475.00Original price was: $475.00.$399.00Current price is: $399.00.
48v Club Car Series GE model number 5BC59JBS6194D, Club Car part number 101785701. Rebuilt to factory specifications . The OEM rubber spline bumper should be eliminated during installation of this motor to avoid damage to the armature & bearing. EMP, Inc may opt to provide GE model 5BC59JBS6360 which is a direct replacement for GE 5Bc59JBS6194D & 6194B. THE NATURE OF…
$575.00Original price was: $575.00.$499.00Current price is: $499.00.
AMD part number EJ8-4001A, Club Car part number 103572501 remanufactured DC motor with non-plastic parts. Added features - non-plastic parts, brass brush holder, new bearing & brushes, sensor magnet has substantial magnetic material. Made in the USA & Quality Tested by EMP, Inc.
$500.00Original price was: $500.00.$410.00Current price is: $410.00.
Motor rebuilt to its original performance to achieve flat ground speed of 22-25 mph with stock tires and stock control. (Can be used with other tire sizes and other controls. Please contact EMP with questions.) The 48v factory Club Car Curtis control cannot be programmed to improve hill speed.
$575.00Original price was: $575.00.$499.00Current price is: $499.00.
“Speed & Torque” designed for flat ground speed of 22-24 mph without torque loss plus upgraded parts. Use with the factory 48v Curtis control and 18 - 23” tires. The 48v factory Club Car Curtis control cannot be programmed to improve hill speed. Designed specifically for Club Car 48v IQ, 18"-23" tires, OEM 12:1 gears, OEM Factory Curtis Controls, Shunt DC…
$575.00Original price was: $575.00.$499.00Current price is: $499.00.
EJ8-4001A-LR3.11 “BEACHIN” (Do not use in deep, loose sand/dunes or water applications) Designed specifically for 48v shunt, 18-20" tires, new flat ground speed of 23-25 MPH, use OEM 12:1 gears Use with OEM 250A Curtis controls found in IQ/i2/Excel vehicles
$575.00Original price was: $575.00.$499.00Current price is: $499.00.
EJ8-4001A-LR3.51 “NEV” (25-28 mph flat, paved ground NEV 18-20” tires, non-lifted) Designed specifically for Club Car 48v IQ, 18-20" tires, OEM 12:1 gears, OEM Factory Curtis Controls, Shunt DC Replaces EJ8-4001A that has 1/4" F terminals & 5/16" A terminals. This motor can also replace EJ4-4001 but note that the EJ4 model has all 5/16" A & F terminals (system…