GE 5BC48JB764, Club Car 36v Series, Part Number 1012191
$499.00
Vintage 36v Club Car Series DC Motor, Part Number 5BC48JB764, Club Car Part Number 1012191. This motor is fully remanufactured to OEM factory specification and tested to quality standards. (direct replacement for older version MT320-08/1012190)
THE NATURE OF A SERIES DC MOTOR/SERIES CART SYSTEM: Series cart systems are very sensitive to changes in load. The most noticeable time you would see this is on hilly terrain. A series cart will slow down as you start to climb a hill and will slow down even more the steeper the grade. When you begin to go downhill, the speed will increase, even to the point of being dangerous if the terrain is steep. The driver should use the brakes to avoid motor overspeed as the motor will not limit the speed. Unfortunately, these reactions are the nature of a series DC motor. While we might be able to make this slightly more or less sensitive, this nature will be present no matter what custom design we provide. Be cautious when working with a series cart. Never operate a series motor, especially at full voltage, with little to no load (wheels up). If you want to make sure a series motor works after servicing the vehicle, depress the throttle only about 10% to avoid damage that would not be considered a warranty claim.
1 in stock
Description
GE motor for 36v Series Club Car remanufactured replacement, 10 tooth female spline
- Fully remanufactured to OEM factory specifications for 36V series Club Car
- This GE model (5BC48JB764) replaced Hitachi MT320-08 for 36v Club Car in the early 1980’s. It was designed by GE to be a direct replacement for MT320-08/1012190
-
Motor spline is pre-lubricated with high performance grease to reduce shaft wear. No rubber bumper needed! If present, please omit using the rubber bumper during installation.
- 10 tooth female spline, SAE terminals, SAE mounting
-
Remanufactured in USA by Electrical Motor Products, Inc.
-
EMP part number 5BC48JB764-RM
- Quality Tested
- If you have this motor and would like to improve the speed and performance, fill out our Customer Questionnaire
- Any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
- SAVE MONEY WITH OUR MOTOR CORE RETURN PROGRAM
- Price shown includes a $175 core charge per motor. The same type of core (MT320-08, 5BC48JB764) can be returned for up to $175 back. There is a MINIMUM payout of $25 if the motor core has a bad armature.
Additional information
| Weight | 38 lbs |
|---|











Reviews
There are no reviews yet.