GET IN & GO, 48v Yamaha YDRE G29, Admiral MOT-B2 with speed sensor
Original price was: $695.00.$595.00Current price is: $595.00.
48v Yamaha YDRE/G29, SHUNT WOUND, DC motor, (DM430-06 A, C, D or G). Yamaha YDRE/G29 cart should have a tow/run switch under the seat along with a small F/R switch. This motor is fully remanufactured to exceed OEM factory specification and tested to quality standards in the USA.
This motor can be used on the Yamaha YDRE/G29 48V system. If the vehicle has a stock control, motor speed sensor will be required and must be plugged into the control. With unmodified stock control, stock tires, and stock battery, expected top speed 16-18 MPH in “standard modes 5,10,15,20, or 25” or 24-26 MPH in “PTV modes A, B, C, D, or E.
(If your stock vehicle with stock tires & stock control is going about 14-15 MPH now, you are in a standard mode. If it is going closer to 18-19 MPH, your control is likely in PTV mode.)
1 in stock
Description
Appropriate for 48V Yamaha G29/YDRE, shunt DC Motor, replaces DM430-06 A, C, D or G
- Fully remanufactured to meet or exceed OEM factory specifications for 48V Yamaha YDRE/G29 shunt system with tow/run switch and small F/R switch
- Motor spline (19 tooth) is pre-lubricated with high performance grease to reduce shaft wear. Rubber bumper is provided and preinstalled.
- Quality Tested & Remanufactured in USA by Electrical Motor Products, Inc.
- EMP, Inc rebuild corrects any China defects
- Replaces DM430-06 A, C, D or G
- EMP part number MOT-B2-43v2-RMd
- Includes speed sensor with appropriate plug for 48V Yamaha YDRE/G29 (Sumitomo plug). Also, since this motor has SAE terminals and mounting, hardware is included.
- 43 slot/43 bar armature type
- Any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
- No core return available unless approved by EMP, Inc. Call for details 1-877-455-1599 (Fort Wayne, IN)
Additional information
| Weight | 48 lbs |
|---|











Reviews
There are no reviews yet.