A02-4012 (73445G01) or A95-4005A (73124G02) EZGO Series, 36v DC AMD remanufactured

36v EZGO Series Motor, AMD Part Number A02-4012, EZGO part number 73445G01 (not for carts with a tow/run switch), Can replace 36v EZGO Series – AMD A95-4005A, EZGO part number 73124G02 (not for carts with a tow/run switch).  This motor is fully remanufactured to OEM factory specification and tested to quality standards.

This motor is a suitable replacement for 19 tooth spline, 36v series EZGO with GE 5BC58JBS6132A & GE 5BC48JB896.  Also is a suitable replacement for 19 tooth spline, 36v series Yamaha with GE 5BC58JBS6184.  (This item is NOT a suitable replacement for 36v, 10 tooth spline models on EZGO or Yamaha)

Call EMP, Inc for other options if the cart has a tow/run switch.  877-455-1599

THE NATURE OF A SERIES DC MOTOR/SERIES CART SYSTEM:  Series cart systems are very sensitive to changes in load.  The most noticeable time you would see this is on hilly terrain.  A series cart will slow down as you start to climb a hill and will slow down even more the steeper the grade.  When you begin to go downhill, the speed will increase, even to the point of being dangerous if the terrain is steep.  The driver should use the brakes to avoid motor overspeed as the motor will not limit the speed.  Unfortunately, these reactions are the nature of a series DC motor. While we might be able to make this slightly more or less sensitive, this nature will be present no matter what custom design we provide.  Be cautious when working with a series cart.  Never operate a series motor, especially at full voltage, with little to no load (wheels up).  If you want to make sure a series motor works after servicing the vehicle, depress the throttle only about 10% to avoid damage that would not be considered a warranty claim.