DM430-06G – Electrical Motor Products

‘MERICA 48v YAMAHA YDRE/G29 EMP Custom Design USA Parts, replaces DM430-06 A, C, D or G

engineering — Fri, 14 Nov 2025 16:41:17 +0000

‘MERICA – Yamaha 48v Shunt DC motor with EMP, Inc Custom Design; a direct replacement for China made DM430-06A – 48v Yamaha G29/YDRE/”Drive”

Quality Controlled made with USA PARTS.

This item includes SAE hardware/mounting bolts & terminal hardware which will replace the Metric hardware used with Hitachi Changsha motors.

EMP P/N 170-505-0001A-LR1.0b (This item is a direct replacement for Hitachi Changsha DM430-06 or A, C, D or G models.)

This item’s flat ground speed will depend on the Moric control settings. See details below…

Custom motor designed as stock replacement for DM430-06* (for G29, YDRE Vehicles using factory OEM Moric controls)
- stock Moric control, w/o PTV code. 18″-20″ tires, 14-16 MPH
- stock Moric control, w/o PTV code, 23″ tires, 16-18 MPH
- stock Moric control, WITH PTV code, 18″-20″ tires, 19-20 MPH
- stock Moric control, WITH PTV code, 23″ tires, ~21-22 MPH
Motor is mechanically interchangeable with Hitachi Changsha models DM430-06 (also with suffix A thru G) .
Yamaha 48v shunt DC, 19 tooth spline
With any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
Limited Warranty – 3 months – Warranty is not automatic the motor must be returned for a warranty approval by our engineer.
As this motor has SAE mounting holes and terminals, EMP, Inc will provide new terminal and mounting hardware with this motor.
Motor arrives with new rubber bumper in spline and spline pre-lubricated with hi-temp/hi-pressure grease for 19 tooth spline
Motor arrives with appropriate sensor plug for the wiring harness. NO splicing or adaptors required.
No core return available

Feel free to call if you have any questions about this item 1-877-455-1599 (Fort Wayne, IN)

HIGH SPEED for LIFTED, Yamaha 48v Shunt DC, DE-LR3.9z1 (Speed Design Replaces OEM DM430-06 (or A, B, C, D, G)

engineering — Tue, 18 Mar 2025 13:09:52 +0000

Yamaha 48v Shunt DC, High speed replacement for DM430-06A for Yamaha G29/YDRE/”Drive”

Custom motor designed as high speed replacement for DM430-06* (for G29, YDRE Vehicles)
- stock control, w/o PTV code. 18″-20″ tires, 18-20 MPH
- stock control, w/o PTV code, 23″ tires, 23-25 MPH
- stock control, WITH PTV code, 18″-20″ tires, 21-23 MPH
- stock control, WITH PTV code, 23″ tires, >27 MPH (NOT RECOMMENDED, RPM could be too high for this design, call us for other options)
Motor is mechanically interchangeable with Hitachi Changsha models DM430-06 (also with suffix A thru G)
Yamaha 48v shunt DC
With any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
Limited Warranty – 3 months – return needed for warranty approval
As this motor has SAE mounting holes and terminals, EMP provides terminal and mounting hardware with motor.
Motor arrives with new rubber bumper in spline and spline pre-lubricated with hi-temp/hi-pressure grease
Motor arrives with appropriate sensor allowing it to plug into your wiring harness (no splicing or adaptors required)

HIGH SPEED, Yamaha 48v Shunt DC, DE-LR3.8dz1 for PTV programmed MORIC (Replaces OEM DM430-06 (or A, B, C, D, G)

engineering — Tue, 18 Mar 2025 12:53:23 +0000

Custom motor with improved performance.

Designed so it can be used with the stock Yamaha G29/YDRE/"Drive" (Moric) control. (It is possible to use with aftermarket control, but requires proper settings from EMP to avoid damage to motor, control, or both.)

Performance: stock 18" (up to 20") dia tires, stock Moric control (WITH PTV code) -- 23-25 MPH (hard flat level ground in free still air, driver only) It can be difficult to know which setting your Moric control might be set in. If your car with stock Moric control and stock motor is achieving about 18-19 MPH, then you probably have the PTV (personal transportation vehicle) code and this is the appropriate option. If this remains confusing, please call or email EMP for clarification and other checks that can be done. MANY OTHER OPTIONS AVAILABLE FOR YAMAHA VEHICLES. IF YOU DO NOT SEE WHAT YOU WANT, CONTACT US BY EMAIL, PHONE, OR BY FILLING OUT QUESTIONNAIRE. (https://empinc.biz/contact-us) Parts are also available for this motor model. (Brush sets, Brush Holder, Bearing, Magnet, Sensor) Contact EMP, Inc to order parts.

HIGH SPEED Yamaha 48v Shunt DC, DE-LR3.7dz1 (Replaces OEM DM430-06 (or A, B, C, D, G)

engineering — Tue, 11 Mar 2025 18:32:39 +0000

Custom motor with improved performance.

Designed so it can be used with the stock Yamaha G29/YDRE/"Drive" (Moric) control. (It is possible to use with aftermarket control, but requires proper settings from EMP to avoid damage to motor, control, or both.)

Performance: stock 18" (up to 20") dia tires, stock Moric control (w/o PTV code) -- 23-25 MPH (hard flat level ground in free still air, driver only) It can be difficult to know which setting your Moric control might be set in. If your car has stock control, stock 18" tires, and is achieving ~15 MPH, then this motor will work fine. If, however, your car with stock Moric control is achieving about 18-19 MPH, then you probably have the PTV (personal transportation vehicle) code and you should consider another option instead. If this remains confusing, please call or email EMP for clarification and other checks that can be done. MANY OTHER OPTIONS AVAILABLE FOR YAMAHA VEHICLES. IF YOU DO NOT SEE WHAT YOU WANT, CONTACT US BY EMAIL, PHONE, OR BY FILLING OUT QUESTIONNAIRE. (https://empinc.biz/contact-us) Parts are also available for this motor model. (Brush sets, Brush Holder, Bearing, Magnet, Sensor) Contact EMP, Inc to order parts.

Heavy Duty Hitachi Changsha Brush Holder & Springs (DM430-06, or A, D, G) BM-HC-056-079 (Remanufactured with high temperature back plate)

engineering — Thu, 01 Feb 2024 16:34:57 +0000

Remanufactured - Brush holder with springs - 48v Yamaha Hitachi Changsha motor models DM430-06, DM430-06A, DM430-06D, DM430-06G, (!!DM430-06C model!! use both brush holder BM-HC-056-079r or BM-056-079-RM and brush set BR-056-079-1P1 for proper fit)

Use with replacement brush set available in our store. BR-056-079-1P1

*A remanufactured item uses process that restore a used or worn-out product to its original condition or specifications, using a combination of new, repaired, and reused parts.

Hitachi Changsha brush set fits model DM430-06 (or A, D, G,) for 48v Yamaha, BR-056-079-1P1-KIT2

engineering — Tue, 03 Oct 2023 14:57:06 +0000

DM430-06 (or A, D, G, *C see desc.) brush set
2-piece set (4 brushes, 4 leads, 2 terminals-Metric M8)
Terminal type Metric M8 (copper “carriage bolt” style stud)
Terminal Length = 1.5 inch
Brush length = 1.15 inch
Width = 0.55 inch
Height = .78 inch
PN: BR-056-079-1P1-KIT2
*DM430-06C use this brush set along with brush holder BM-HC-056-079 to eliminate fit issues with C model OEM brush holders.
Check our part Part Compatibility Table to make sure it fits your motor.
With any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz

Hitachi Changsha Brush Holder & Springs (DM430-06, DM430-06A, DM430-06D, DM430-06G. *DM430-06C) BM-HC-056-079r (Refurbished Part)

engineering — Fri, 29 Sep 2023 20:31:10 +0000

Reclaimed OEM Part - Brush holder with springs - 48v Yamaha Hitachi Changsha motor models DM430-06, DM430-06A, DM430-06D, DM430-06G, (*DM430-06C model use both brush holder BM-HC-056-079r or BM-056-079-RM and brush set BR-056-079-1P1 for proper fit)

Use with replacement brush set available in our store. BR-056-079-1P1

*Refurbished items are original items that have been repaired, cleaned, and restored to their original condition.

Yamaha 48v Shunt DC, Hitachi Changsha DM430-06A use with OEM Moric Control (replaces models DM430-06 or A, C, D, G)

engineering — Wed, 27 Sep 2023 18:13:53 +0000

Yamaha 48v Shunt DC, Hitachi Changsha DM430-06A for G29 or YDRE Drive

Remanufactured to stock OEM specifications (for G29, YDRE Vehicles)
Motor is interchangeable with Hitachi Changsha models DM430-06, DM430-06A, DM430-06C, DM430-06D, and DM430-06G
EMP Part Number: DM430-06A-RM
Yamaha 48v shunt DC
With any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
No core return available
No warranty available
Suitable Substitution (of equal or higher value) May Occur if we are out of stock

If you prefer a “tougher” motor consider https://empinc.biz/store/motor/yamaha-motor/lr1-0b-dd-170-505-0001a