Yamaha – Electrical Motor Products

Yamaha G22 48v Shunt DC, 5BC59JBS6370/JU2-H1890-00 stock remanufactured

engineering — Sat, 28 Mar 2026 13:03:11 +0000

Yamaha 48v Shunt DC, Stock remanufactured motor 5BC58JBS6370 (Yamaha PN JU2-H1890-00) used on Yamaha G22

Stock remanufactured motor originally GE 5BC59JBS6370 for use on Yamaha G22 vehicles
- made for use with stock control
Motor is an actual stock motor, remanufactured to original specifications (compatible with DL4-4002/JU2-H1890-10)
Yamaha 48v shunt DC
With any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
Limited Warranty – 3 months – return needed for warranty approval
This motor has SAE mounting holes and terminals. (terminals are 5/16-18, mounting bolt holes are 1/4-20)
Motor arrives with new rubber bumper in spline and spline pre-lubricated with hi-temp/hi-pressure grease
Motor arrives with appropriate sensor allowing it to plug into your wiring harness (has original Deutsch DT04-3P plug…. no splicing or adaptors required)

Yamaha G19 48v Shunt DC, 5BC58JBS6272A/JR1-H1890-00 stock remanufactured

engineering — Sat, 28 Mar 2026 12:30:21 +0000

Yamaha 48v Shunt DC, Stock remanufactured 5BC58JBS6272A (Yamaha PN JR1-H1890-00) used on Yamaha G19

Stock remanufactured motor originally GE 5BC58JBS6272A for use on Yamaha G19 vehicles
- made for use with stock control
Motor is an actual stock motor, remanufactured to original specifications (compatible with 5BC58JBS6272B, JR1-H1890-00, and JR1-H1890-01)
Yamaha 48v shunt DC
With any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
Limited Warranty – 3 months – return needed for warranty approval
This motor has SAE mounting holes and terminals.
Motor arrives with new rubber bumper in spline and spline pre-lubricated with hi-temp/hi-pressure grease
Motor arrives with appropriate sensor allowing it to plug into your wiring harness (has original amp 207563-1 plug…. no splicing or adaptors required)

GET IN & GO, 48v Yamaha YDRE G29, Admiral MOT-B2 with speed sensor

engineering — Wed, 17 Dec 2025 15:09:29 +0000

Appropriate for 48V Yamaha G29/YDRE, shunt DC Motor, replaces DM430-06 A, C, D or G

Fully remanufactured to meet or exceed OEM factory specifications for 48V Yamaha YDRE/G29 shunt system with tow/run switch and small F/R switch
Motor spline (19 tooth) is pre-lubricated with high performance grease to reduce shaft wear. Rubber bumper is provided and preinstalled.
Quality Tested & Remanufactured in USA by Electrical Motor Products, Inc.
EMP, Inc rebuild corrects any China defects
Replaces DM430-06 A, C, D or G
EMP part number MOT-B2-43v2-RMd
Includes speed sensor with appropriate plug for 48V Yamaha YDRE/G29 (Sumitomo plug). Also, since this motor has SAE terminals and mounting, hardware is included.
43 slot/43 bar armature type
Any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz

No core return available unless approved by EMP, Inc. Call for details 1-877-455-1599 (Fort Wayne, IN)

‘MERICA 48v YAMAHA YDRE/G29 EMP Custom Design USA Parts, replaces DM430-06 A, C, D or G

engineering — Fri, 14 Nov 2025 16:41:17 +0000

‘MERICA – Yamaha 48v Shunt DC motor with EMP, Inc Custom Design; a direct replacement for China made DM430-06A – 48v Yamaha G29/YDRE/”Drive”

Quality Controlled made with USA PARTS.

This item includes SAE hardware/mounting bolts & terminal hardware which will replace the Metric hardware used with Hitachi Changsha motors.

EMP P/N 170-505-0001A-LR1.0b (This item is a direct replacement for Hitachi Changsha DM430-06 or A, C, D or G models.)

This item’s flat ground speed will depend on the Moric control settings. See details below…

Custom motor designed as stock replacement for DM430-06* (for G29, YDRE Vehicles using factory OEM Moric controls)
- stock Moric control, w/o PTV code. 18″-20″ tires, 14-16 MPH
- stock Moric control, w/o PTV code, 23″ tires, 16-18 MPH
- stock Moric control, WITH PTV code, 18″-20″ tires, 19-20 MPH
- stock Moric control, WITH PTV code, 23″ tires, ~21-22 MPH
Motor is mechanically interchangeable with Hitachi Changsha models DM430-06 (also with suffix A thru G) .
Yamaha 48v shunt DC, 19 tooth spline
With any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
Limited Warranty – 3 months – Warranty is not automatic the motor must be returned for a warranty approval by our engineer.
As this motor has SAE mounting holes and terminals, EMP, Inc will provide new terminal and mounting hardware with this motor.
Motor arrives with new rubber bumper in spline and spline pre-lubricated with hi-temp/hi-pressure grease for 19 tooth spline
Motor arrives with appropriate sensor plug for the wiring harness. NO splicing or adaptors required.
No core return available

Feel free to call if you have any questions about this item 1-877-455-1599 (Fort Wayne, IN)

HIGH SPEED for LIFTED, Yamaha 48v Shunt DC, DE-LR3.9z1 (Speed Design Replaces OEM DM430-06 (or A, B, C, D, G)

engineering — Tue, 18 Mar 2025 13:09:52 +0000

Yamaha 48v Shunt DC, High speed replacement for DM430-06A for Yamaha G29/YDRE/”Drive”

Custom motor designed as high speed replacement for DM430-06* (for G29, YDRE Vehicles)
- stock control, w/o PTV code. 18″-20″ tires, 18-20 MPH
- stock control, w/o PTV code, 23″ tires, 23-25 MPH
- stock control, WITH PTV code, 18″-20″ tires, 21-23 MPH
- stock control, WITH PTV code, 23″ tires, >27 MPH (NOT RECOMMENDED, RPM could be too high for this design, call us for other options)
Motor is mechanically interchangeable with Hitachi Changsha models DM430-06 (also with suffix A thru G)
Yamaha 48v shunt DC
With any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
Limited Warranty – 3 months – return needed for warranty approval
As this motor has SAE mounting holes and terminals, EMP provides terminal and mounting hardware with motor.
Motor arrives with new rubber bumper in spline and spline pre-lubricated with hi-temp/hi-pressure grease
Motor arrives with appropriate sensor allowing it to plug into your wiring harness (no splicing or adaptors required)

HIGH SPEED, Yamaha 48v Shunt DC, DE-LR3.8dz1 for PTV programmed MORIC (Replaces OEM DM430-06 (or A, B, C, D, G)

engineering — Tue, 18 Mar 2025 12:53:23 +0000

Custom motor with improved performance.

Designed so it can be used with the stock Yamaha G29/YDRE/"Drive" (Moric) control. (It is possible to use with aftermarket control, but requires proper settings from EMP to avoid damage to motor, control, or both.)

Performance: stock 18" (up to 20") dia tires, stock Moric control (WITH PTV code) -- 23-25 MPH (hard flat level ground in free still air, driver only) It can be difficult to know which setting your Moric control might be set in. If your car with stock Moric control and stock motor is achieving about 18-19 MPH, then you probably have the PTV (personal transportation vehicle) code and this is the appropriate option. If this remains confusing, please call or email EMP for clarification and other checks that can be done. MANY OTHER OPTIONS AVAILABLE FOR YAMAHA VEHICLES. IF YOU DO NOT SEE WHAT YOU WANT, CONTACT US BY EMAIL, PHONE, OR BY FILLING OUT QUESTIONNAIRE. (https://empinc.biz/contact-us) Parts are also available for this motor model. (Brush sets, Brush Holder, Bearing, Magnet, Sensor) Contact EMP, Inc to order parts.

HIGH SPEED Yamaha 48v Shunt DC, DE-LR3.7dz1 (Replaces OEM DM430-06 (or A, B, C, D, G)

engineering — Tue, 11 Mar 2025 18:32:39 +0000

Custom motor with improved performance.

Designed so it can be used with the stock Yamaha G29/YDRE/"Drive" (Moric) control. (It is possible to use with aftermarket control, but requires proper settings from EMP to avoid damage to motor, control, or both.)

Performance: stock 18" (up to 20") dia tires, stock Moric control (w/o PTV code) -- 23-25 MPH (hard flat level ground in free still air, driver only) It can be difficult to know which setting your Moric control might be set in. If your car has stock control, stock 18" tires, and is achieving ~15 MPH, then this motor will work fine. If, however, your car with stock Moric control is achieving about 18-19 MPH, then you probably have the PTV (personal transportation vehicle) code and you should consider another option instead. If this remains confusing, please call or email EMP for clarification and other checks that can be done. MANY OTHER OPTIONS AVAILABLE FOR YAMAHA VEHICLES. IF YOU DO NOT SEE WHAT YOU WANT, CONTACT US BY EMAIL, PHONE, OR BY FILLING OUT QUESTIONNAIRE. (https://empinc.biz/contact-us) Parts are also available for this motor model. (Brush sets, Brush Holder, Bearing, Magnet, Sensor) Contact EMP, Inc to order parts.

5BC58JBS6184 36v Yamaha Series GE 19 tooth spline, remanufactured

engineering — Wed, 08 May 2024 18:24:47 +0000

5BC58JBS6184, originally produced for 36V Yamaha series, 19 tooth female spline

Fully Remanufactured GE motor
Added features: originally USA made by GE
Designed specifically for 36v Series Yamaha using the factory GE control.
19 tooth spline, spline is pre-lubricated with high performance grease to reduce shaft wear. Rubber bumper is provided and preinstalled.
Remanufactured in USA by Electrical Motor Products, Inc (Lightning Redesign)
EMP part number 5BC58JBS6184-RM
Any questions, please call us for support at 877-455-1599 or email us at empinc@empinc.biz
No core return available

A02-4012 (73445G01) or A95-4005A (73124G02) EZGO Series, 36v DC AMD remanufactured

engineering — Tue, 02 Apr 2024 14:56:55 +0000

36v EZGO Series Motor, AMD Part Number A02-4012, EZGO part number 73445G01 (not for carts with a tow/run switch), Can replace 36v EZGO Series - AMD A95-4005A, EZGO part number 73124G02 (not for carts with a tow/run switch). This motor is fully remanufactured to OEM factory specification and tested to quality standards. This motor is a suitable replacement for 19 tooth spline, 36v series EZGO with GE 5BC58JBS6132A & GE 5BC48JB896. Also is a suitable replacement for 19 tooth spline, 36v series Yamaha with GE 5BC58JBS6184. (This item is NOT a suitable replacement for 36v, 10 tooth spline models on EZGO or Yamaha) Call EMP, Inc for other options if the cart has a tow/run switch. 877-455-1599

THE NATURE OF A SERIES DC MOTOR/SERIES CART SYSTEM: Series cart systems are very sensitive to changes in load. The most noticeable time you would see this is on hilly terrain. A series cart will slow down as you start to climb a hill and will slow down even more the steeper the grade. When you begin to go downhill, the speed will increase, even to the point of being dangerous if the terrain is steep. The driver should use the brakes to avoid motor overspeed as the motor will not limit the speed. Unfortunately, these reactions are the nature of a series DC motor. While we might be able to make this slightly more or less sensitive, this nature will be present no matter what custom design we provide. Be cautious when working with a series cart. Never operate a series motor, especially at full voltage, with little to no load (wheels up). If you want to make sure a series motor works after servicing the vehicle, depress the throttle only about 10% to avoid damage that would not be considered a warranty claim.

Vintage Hitachi MT320-06 for 36v Yamaha Series

engineering — Mon, 11 Mar 2024 19:39:13 +0000

Vintage 36v Yamaha DC Motor, Part Number MT320-06 (Hitachi). This motor is fully remanufactured to OEM factory specification and tested to quality standards. NOT A HITACHI CHANGSHA! [At EMP's discretion, we may ship either sku RM-MT320-06 or RMa-MT320-06. These are fully interchangeable.] NOTE: If you really need model MT320-10, EMP can provide. It is the same as this model except for the addition of a thermostat. We can certainly add the thermostat, but the thermostat plug is an unknown and we may need to provide with leads and no plug and splicing may be required.